Patch Together has posted up a couple of work-in-progress photos of two new resin figure sculpts that they are sure to release. Above, is Monica in earphones (from Wapsi Square) and Robin Desanto (from Shortpacked) is pictured below.
REVIEW: Miss Mary Jane Resin
Background Paigey, otherwise known as Paige Pumphrey, submitted her Miss Mary Jane design to Patch Together with the hopes that she'd receive enough votes to get her character produced. Fans and collectors made that happen and Miss Mary Jane was realized in resin form. Here's what Paige has to say about her design: Miss Mary [...]
Patch Together’s Steampunk Challenge
The folks at Patch Together have announced their next challenge - Steampunk. The submission deadline for this round is Tuesday August 31st 2010. You can check out all of the contest details here and best of luck on your designs.
Skonk By Olly
You can currently pick up the Skonk resin figure by artist Olly and Patch Together. The 6" tall piece is currently available in three different colorways - Blue/Black; Green/Gray; Pink/Yellow. You can purchase Skonk for $34.99 each.
REVIEW: Tube Ferret
Background It’s possible that you’ve seen the Ferret Dance (A series of tubes) video on You Tube. If not…we’ve included it below for your viewing pleasure. Artist Jill Czajkowski, who goes by the name jillustrate, created the original character designs for the animation. And after submitting her designs to Patch Together, toy collectors can now [...]
Diesel Sculpt
Patch Together has posted several work-in-progress shots of the upcoming Diesel resin figure. This is just the preliminary sculpt, so things might change around a little bit before the production piece is released.
REVIEW: Ridley Hooper
Background Ridley Hooper is the reluctant protagonist of Bob K.'s cult black and white horror serial - Elsie Hooper. The character’s main objective is to find his younger sister, Elsie, and battle the shadwomen along the way. Ridley is the first character in a limited run of figures from the Elsie Hooper serial that will [...]
Plant Spirit WIP
Here's another work-in-progress shot from Patch Together. Named Plant Spirit, it definitely qualifies for one of the more intricate sculpts from the folks at PT. We'll let you know if this one gets to production stage.
Kit the Fox Sculpt
Patch Together has dropped these preliminary sculpt photos of their Kit the Fox resin statue. What are your thoughts? Anyone familiar with this character?
The Purring Gryphon
Patch Together has posted these work-in-progress shots of The Purring Gryphon. So what are your thoughts of this sculpt? I'm assuming this will be a resin piece...and that's one huge tail.
Patch Together’s D-Rex
Patch Together's newest figure is the D-Rex resin figure. A mixture of a Dragon and a Tyrannosaurus Rex, the character was designed by artist SuziDragonlady. This 8" tall piece is available for a pre-order price of $44.95 each.
Mobster Anubis
Patch Together has posted a few photos of their Mobster Anubis resin figure. From artist Samotage, this is set to be an 8" tall resin piece. It makes complete sense since whenever I think of mobsters, I think of Egyptian gods.
Patch Together Challenge – Childhood Story Characters
Are you fascinated by characters from fairy tales and children stories? Do you still remember them from your childhood? Do you have a favorite who you wish to see made into a figure? If so, this month's challenge from Patch Together is for you. Send in your personal interpretations of your favorite fairy tale characters. [...]
Floxy the Fox
Floxy - the soon to be released blindbox series by Patch Together - was designed by artist Soma. Even though they're waiting for prototype/coloring approval from the participating artists, they have sent along two esigns that will be a part of the series. X-Ray Floxy (VISEone) will be changed a little to adjust the size [...]
Clockwork Assassin Pre-Order
Patch Together will start taking pre-orders on June 1st, 2010 for their Cute Animal Warriors challenge winner. The winning design - Clockwork Assassin - was done by Dave "Oddling" Montes. This edition of 50 numbered pieces will be 6" tall and made of resin. You'll be able to pre-order them for $49.95 each.
Tiny Horus
Patch Together has made Claire Hummel's (artist name Shoomlah) Tiny Horus figure available for pre-order. The 5" tall resin piece has an obvious ancient Egyptian influence. You can pre-order the figure now for $34.99 with an estimated shipping date sometime in June 2010.
Skulldog Plush
Keryn Everett (aka Skulldog) created this Skulldog plush prototype, which is now up for production through Patch Together. It's estimated to ship in August of 2010, but you can now pre-order this plush for $29.95. Skulldogs are short, stubby, and kind of lazy, this one will be huggable, with extra fuzzy neck poof, and soft [...]
ChumBuddy Sleeping Bag
It's a sleeping bag! It's a stuffed toy! IT'S A SHARK! In an effort to make sharks more cuddly, artist Kendra Phillips designed and produced a prototype for the ChumBuddy. Now, this 7 foot long monster plush will be produced and released by Patch Together. Estimated to be released in the 4th quarter of 2010, [...]
The Cyclopes
This is one of the Greek Mythology inspired creations submitted to Patch Together for their current Creature Challenge (running until May 1st 2010). The Cyclopes - Arges, Brontes and Steropes - are designed by The Pixels (Kasia Piotrowska). If you want to get your design entered into the contest, you still have a few days [...]
Floxy The Fox Blindbox Series
Patch Together has released some work-in-progress prototype shots of their upcoming blindbox series - Floxy The Fox. While a release date is not yet set, they have announced the artist lineup. The artists include designs from: Bunka, Miss Monster, Dust, VISEone, Okkle, Saprophilous, Stick-A-Thing, Flim and Soma (the original designer of FLOXY).
Clockwork Assassin Sculpt
Patch Together has posted up work-in-progress shots of their Clockwork Assassin sculpt. The figure, designed by Oddling, is set to measure 6" in height and be cast in resin.
Wapsi Square Tepoz Sculpt
Patch Together added this new figure sculpt - Tepoz - to their site. It's labeled as a work-in-progress piece. The 3" tall resin character is designed by Paul Taylor (Wapsi Square) and will join the rest of the characters from his web comic.
Patch Together’s Hooba Plush
Patch Together has released their Hooba plush, designed by UK artist Jake Gumbleton. "Hooba is a red panda. He likes to eat bamboo a great deal. He is a lonely fellow because there are only a few red pandas left." You can now order your very own plush 12" tall Hooba for $24.95 each.
Yenny Lopez Sculpt
The guys at Patch Together have sent over the latest images of their Yenny Lopez prototype sculpt...based on the artwork of Dave Alvarez. This might be a little too risque for the kiddos... From the online comic "Yenny", Yenny is a beautiful young girl who dreams of becoming a famous model. The only problem is, [...]
-
Giant Robot’s Uglyverse Webstore Special
-
Bed Monster Release
-
Lemi Mini Plush Series
-
Custom Marshall Blind-Box Series Reveal
-
Mr. Cupcake Adventure Time Paper Foldable
-
JPK’s Crusader Big Sal
-
REVIEW: Uglydoll – Uglycorn
-
2010 Unmasked Design Challenge Winners
-
New Tees from Crazy Go Lucky
-
O-No Sushi Love Chunk
-
Mycle2313: RT @plasticandplush: P&P NEWS: : JPK's Crusader Bi...
-
-
Used Plastic Pallet: Just came and read, this is wow! I was seek from m...
-
-
© 2010 Plastic and Plush.
Typepad to Wordpress by Foliovision